Incoming call or voicemail indicator
Camera (Cisco IP Phone 8845 and 8865)
Feature and session buttons
Softkeys
Back,Navigation cluster, and Release
Hold, Transfer, and Conference
Headset,Speakerphone, and Mute
Voicemail, Applications, and Directory
Volume
Feature and Session Buttons
Use feature buttons (left side) to view calls on a line or access features such as Speed Dial. Use session buttons (right side) to perform tasks such as resuming a held call. If you use a locale that reads right to left, the feature and session button locations are swapped.
Buttons illuminate to indicate status:
Green, steady:Active call
Green,flashing: Held call
Amber,steady: Private line in use
Amber,flashing: Incoming call
Red,steady: Remote line in use
Red,flashing: Remote line on hold
Make a Call
Enter a number and pick up the handset.
Answer a Call
Press the flashing amber line button or pick up the handset.
Put a Call on Hold
1. Press Hold 
.
2. To resume a held call, press Hold again.
View Your Recent Calls
1. Press Applications 
.
2. Select Recents.
3. Select a line to view.
Transfer a Call to Another Person
1. From a call that is not on hold, press Transfer
.
2. Enter the other person’s phone number.
3. Press Transfer again.
Add Another Person to a Call
1. From a connected call that is not on hold, press Conference 
.
2. Press Active calls to select a held call.
3. Press Conference again.
Make a Call with a Headset
1. Plug in a headset.
2. Enter a number using the keypad.
3. Press Headset 
.
Make a Call with the Speakerphone
1. Enter a number using the keypad.
2. Press Speakerphone 
.
Mute Your Audio
1. Press Mute 
.
2. Press Mute again to turn mute off.
Stop Your Video
(Cisco IP Phone 8845 and 8865 only.)
1. Turn the camera shutter counterclockwise to stop your video.
2. Turn the camera shutter clockwise to start your video.
Listen to Your Voice Messages
Press Messages 
and follow the voice prompts. To check messages for a specific line, press the line button first.
Forward All Calls
1. Select a line and press Forward all.
2. Dial the number that you want to forward to, or press Voicemail.
3. To receive calls again, press Forward off.
Adjust the Volume in a Call
Press Volume 
left or right to adjust the handset, headset, or speakerphone volume when the phone is in use.
Adjust the Ringtone Volume
Press Volume left or right to adjust the ringer volume when the phone is not in use.
Change the Ringtone
1. Press Applications 
.
2. Select Settings > Ringtone.
3. Select a line.
4. Scroll through the list of ringtones and press Play to hear a sample.
5. Press Set and Apply to save a selection.
Adjust the Screen Brightness
1. Press Applications 
.
2. Select Settings > Brightness.
3. Press the Navigation cluster left to decrease, or right to increase, the brightness.
4. Press Save.
Change the Font Size
1. Press Applications .
2. Select Settings> Font Size.
3. Select a font size.
4. Press Save.
Pair a Mobile Device
(Cisco IP Phone 8851, 8861, and 8865 only.)
1. Put your mobile device in discoverable mode.
2. On your IP Phone, press Applications 
.
3. Select Bluetooth > Add Bluetooth.
4. Select your mobile device from the available devices list to pair.
5. Verify the passkey on your mobile device and your IP Phone.
6. When you are prompted to save mobile contacts, choose to make your mobile device contacts and call history available on your IP Phone.
User Guide
View the full User Guide at http://www.cisco.com/c/en/us/ support/collaboration-endpoints/unified-ip-phone-8800- series/products-user-guide-list.html.
 |
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)